DocuSign

Use DocuSign connector to perform read operations on DocuSign.

Before you begin

Before using the DocuSign connector, do the following tasks:

  • In your Google Cloud project:
    • Grant the roles/connectors.admin IAM role to the user configuring the connector.
    • Grant the following IAM roles to the service account that you want to use for the connector:
      • roles/secretmanager.viewer
      • roles/secretmanager.secretAccessor

      A service account is a special type of Google account intended to represent a non-human user that needs to authenticate and be authorized to access data in Google APIs. If you don't have a service account, you must create a service account. For more information, see Creating a service account.

    • Enable the following services:
      • secretmanager.googleapis.com (Secret Manager API)
      • connectors.googleapis.com (Connectors API)

      To understand how to enable services, see Enabling services.

    If these services or permissions have not been enabled for your project previously, you are prompted to enable them when configuring the connector.

Configure the connector

Configuring the connector requires you to create a connection to your data source (backend system). A connection is specific to a data source. It means that if you have many data sources, you must create a separate connection for each data source. To create a connection, do the following steps:

  1. In the Cloud console, go to the Integration Connectors > Connections page and then select or create a Google Cloud project.

    Go to the Connections page

  2. Click + CREATE NEW to open the Create Connection page.
  3. In the Location section, choose the location for the connection.
    1. Region: Select a location from the drop-down list.

      For the list of all the supported regions, see Locations.

    2. Click NEXT.
  4. In the Connection Details section, complete the following:
    1. Connector: Select DocuSign from the drop down list of available Connectors.
    2. Connector version: Select the Connector version from the drop down list of available versions.
    3. In the Connection Name field, enter a name for the Connection instance.

      Connection names must meet the following criteria:

      • Connection names can use letters, numbers, or hyphens.
      • Letters must be lower-case.
      • Connection names must begin with a letter and end with a letter or number.
      • Connection names cannot exceed 49 characters.
    4. Optionally, enter a Description for the connection instance.
    5. Optionally, enable Cloud logging, and then select a log level. By default, the log level is set to Error.
    6. Service Account: Select a service account that has the required roles.
    7. Optionally, select UseSandbox if you use a DocuSign sandbox account.
    8. Optionally, configure the Connection node settings:

      • Minimum number of nodes: Enter the minimum number of connection nodes.
      • Maximum number of nodes: Enter the maximum number of connection nodes.

      A node is a unit (or replica) of a connection that processes transactions. More nodes are required to process more transactions for a connection and conversely, fewer nodes are required to process fewer transactions. To understand how the nodes affect your connector pricing, see Pricing for connection nodes. If you don't enter any values, by default the minimum nodes are set to 2 (for better availability) and the maximum nodes are set to 50.

    9. Optionally, click + ADD LABEL to add a label to the Connection in the form of a key/value pair.
    10. Click NEXT.
  5. In the Authentication section, enter the authentication details.
    1. Select an Authentication type and enter the relevant details.

      The following authentication types are supported by the DocuSign connection:

      • OAUTH 2.0 - Authorization Code
      • OAuth 2.0 - JWT Bearer
    2. To understand how to configure these authentication types, see Configure authentication.

    3. Click NEXT.
  6. Review: Review your connection and authentication details.
  7. Click Create.

Configure authentication

Enter the details based on the authentication you want to use.

  • OAUTH 2.0 - Authorization Code
    • Client ID: The client ID used for requesting access tokens.
    • Scopes: A comma-separated list of desired scopes.
    • Client Secret: Secret Manager Secret containing the client secret for the connected app you created.
  • OAuth 2.0 - JWT Bearer
    • Connected App Consumer Key:The consumer key provided for the connected app you created.
    • Username: The username associated with the connected app you created.
    • Private Key: Secret Manager Secret containing the contents of the private key file. The private key should match the public key/certificate provided to Connector.

Connection configuration samples

This section lists the sample values for the various fields that you configure when creating the connection.

OAUTH 2.0 - Authorization Code connection type

Field name Details
Location us-central1
Connector DocuSign
Connector version 1
Connection Name gcp-docusign-new-auth
Enable Cloud Logging No
UseSandbox Yes
Service Account SERVICE_ACCOUNT_NAME@developer.gserviceaccount.com
Authentication OAuth 2.0 - Authorization code
Client Id 67dxxxxx-xxxx-xxxx-xxxx-xxxxxxxcb79
Scopes signature
Client secret CLIENT_SECRET
Secret Version 1

OAuth 2.0 - JWT Bearer connection type

Field name Details
Location us-central1
Connector DocuSign
Connector version 1
Connection Name gcp-docusign-token
Enable Cloud Logging No
UseSandbox Yes
Service Account SERVICE_ACCOUNT_NAME@developer.gserviceaccount.com
Authentication OAuth 2.0 - JWT Bearer
Connected App Consumer Key 67dxxxxx-xxxx-xxxx-xxxx-xxxxxxxcb79
Username USER_NAME
Private Key PRIVATE_KEY
Secret Version 1

Entities, operations, and actions

All the Integration Connectors provide a layer of abstraction for the objects of the connected application. You can access an application's objects only through this abstraction. The abstraction is exposed to you as entities, operations, and actions.

  • Entity: An entity can be thought of as an object, or a collection of properties, in the connected application or service. The definition of an entity differs from a connector to a connector. For example, in a database connector, tables are the entities, in a file server connector, folders are the entities, and in a messaging system connector, queues are the entities.

    However, it is possible that a connector doesn't support or have any entities, in which case the Entities list will be empty.

  • Operation: An operation is the activity that you can perform on an entity. You can perform any of the following operations on an entity:

    Selecting an entity from the available list, generates a list of operations available for the entity. For a detailed description of the operations, see the Connectors task's entity operations. However, if a connector doesn't support any of the entity operations, such unsupported operations aren't listed in the Operations list.

  • Action: An action is a first class function that is made available to the integration through the connector interface. An action lets you make changes to an entity or entities, and vary from connector to connector. Normally, an action will have some input parameters, and an output parameter. However, it is possible that a connector doesn't support any action, in which case the Actions list will be empty.

System limitations

The DocuSign connector can process 3 transactions per second, per node, and throttles any transactions beyond this limit. By default, Integration Connectors allocates 2 nodes (for better availability) for a connection.

For information on the limits applicable to Integration Connectors, see Limits.

Entity operation examples

This section shows how to perform some of the entity operations in this connector.

The value for an Entity ID should be passed directly, such as 16ab549b-95d7-47cb-b557-c2476ef62d9d. The ID 16ab549b-95d7-47cb-b557-c2476ef62d9d is the unique primary key value that must be passed.

Example - LIST Operation for Entity "Accounts"

  1. In the Configure connector task dialog, click Entities.
  2. Select Accounts from the Entity list.
  3. Select the LIST operation, and then click Done.
  4. Task Input section of the Connectors task, you can set the filterClause as per your requirement.

Example - LIST Operation for Entity "Documents"

  1. In the Configure connector task dialog, click Entities.
  2. Select Documents from the Entity list.
  3. Select the LIST operation, and then click Done.
  4. Task Input section of the Connectors task, you can set the filterClause as per your requirement.

Example - LIST Operation for Entity "Envelopes"

  1. In the Configure connector task dialog, click Entities.
  2. Select Envelopes from the Entity list.
  3. Select the LIST operation, and then click Done.
  4. Task Input section of the Connectors task, you can set the filterClause as per your requirement.

Example - LIST Operation for Entity "Folders"

  1. In the Configure connector task dialog, click Entities.
  2. Select Folders from the Entity list.
  3. Select the LIST operation, and then click Done.
  4. Task Input section of the Connectors task, you can set the filterClause as per your requirement.

Example - LIST Operation for Entity "Groups"

  1. In the Configure connector task dialog, click Entities.
  2. Select Groups from the Entity list.
  3. Select the LIST operation, and then click Done.
  4. Task Input section of the Connectors task, you can set the filterClause as per your requirement.

Example - LIST Operation for Entity "Users"

  1. In the Configure connector task dialog, click Entities.
  2. Select Users from the Entity list.
  3. Select the LIST operation, and then click Done.
  4. Task Input section of the Connectors task, you can set the filterClause as per your requirement.

You can perform LIST operations on the following entities as well:

  • UserInfo
  • UserSignatures
  • Workspaces
  • Recipients
  • AccountBrands
  • AccountCustomFields
  • EnvelopeTemplates
  • EnvelopeAttachments
  • EnvelopeConsumerDisclosures
  • CloudStorageProviders
  • CustomTabs
  • Locks
  • GroupBrands
  • GroupUsers
  • PowerForms
  • RecipientTabs
  • SigningGroups
  • SigningGroupUsers
  • Templates

Example - GET single record for Entity "Accounts"

  1. In the Configure connector task dialog, click Entities.
  2. Select Accounts from the Entity list.
  3. Select the GET operation, and then click Done.
  4. To set the entity ID, in the Data Mapper section of the Data Mapping, click on Open Data Mapping Editor and then enter 2.4578824E7 in the Input Value field and choose the EntityId as Local variable.

Example - GET single record for Entity "Documents"

  1. In the Configure connector task dialog, click Entities.
  2. Select Documents from the Entity list.
  3. Select the LIST operation, and then click Done.
  4. To set the Filter Clause, in the Data Mapper section of the Data Mapping, click on Open Data Mapping Editor and then enter Type='envelopes' AND Id='8e18be14-3254-4cbe-947d-f0d1cd62f5f8' in the Input Value field and choose the Filter Clause as Local variable.

Example - GET single record for Entity "Envelopes"

  1. In the Configure connector task dialog, click Entities.
  2. Select Envelopes from the Entity list.
  3. Select the GET operation, and then click Done.
  4. To set the entity ID, in the Data Mapper section of the Data Mapping, click on Open Data Mapping Editor and then enter 8e18be14-3254-4cbe-947d-f0d1cd62f5f87 in the Input Value field and choose the EntityId as Local variable.

Example - GET single record for Entity "Folders"

  1. In the Configure connector task dialog, click Entities.
  2. Select Folders from the Entity list.
  3. Select the GET operation, and then click Done.
  4. To set the entity ID, in the Data Mapper section of the Data Mapping, click on Open Data Mapping Editor and then enter 05f76d13-a513-492b-8c58-176702768db0 in the Input Value field and choose the EntityId as Local variable.

Example - GET single record for Entity "Groups"

  1. In the Configure connector task dialog, click Entities.
  2. Select Groups from the Entity list.
  3. Select the GET operation, and then click Done.
  4. To set the entity ID, in the Data Mapper section of the Data Mapping, click on Open Data Mapping Editor and then enter 1.4167231E7 in the Input Value field and choose the EntityId as Local variable.

Example - GET single record for Entity "Users"

  1. In the Configure connector task dialog, click Entities.
  2. Select Users from the Entity list.
  3. Select the GET operation, and then click Done.
  4. To set the entity ID, in the Data Mapper section of the Data Mapping, click on Open Data Mapping Editor and then enter 16ab549b-95d7-47cb-b557-c2476ef62d9d in the Input Value field and choose the EntityId as Local variable.

You can perform GET operations on the following entities as well:

  • UserInfo
  • UserSignatures
  • Workspaces
  • Recipients
  • AccountBrands
  • AccountCustomFields
  • EnvelopeTemplates
  • EnvelopeAttachments
  • EnvelopeConsumerDisclosures
  • CloudStorageProviders
  • CustomTabs
  • Locks
  • GroupBrands
  • GroupUsers
  • RecipientTabs
  • SigningGroups
  • SigningGroupUsers
  • Templates

Use terraform to create connections

You can use the Terraform resource to create a new connection.

To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.

To view a sample terraform template for connection creation, see sample template.

When creating this connection by using Terraform, you must set the following variables in your Terraform configuration file:

Parameter name Data type Required Description
proxy_enabled BOOLEAN False Select this checkbox to configure a proxy server for the connection.
proxy_auth_scheme ENUM False The authentication type to use to authenticate to the ProxyServer proxy. Supported values are: BASIC, DIGEST, NONE
proxy_user STRING False A user name to be used to authenticate to the ProxyServer proxy.
proxy_password SECRET False A password to be used to authenticate to the ProxyServer proxy.

Use the DocuSign connection in an integration

After you create the connection, it becomes available in both Apigee Integration and Application Integration. You can use the connection in an integration through the Connectors task.

  • To understand how to create and use the Connectors task in Apigee Integration, see Connectors task.
  • To understand how to create and use the Connectors task in Application Integration, see Connectors task.

Get help from the Google Cloud community

You can post your questions and discuss this connector in the Google Cloud community at Cloud Forums.

What's next